English CORDLESS OSCILLATING MULTI‑TOOL DCS353 Congratulations! EC‑Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Cordless Oscillating Multi-Tool DCS353 DCS353...
English Batteries Chargers/Charge Times (Minutes)** Weight DCB112/ DCB115/ DCB104 DCB107 DCB110 DCB113 DCB116 DCB132 DCB119 Cat # DCB1102 DCB1104 DCB122 0.22 DCB124/G 0.25 DCB125 0.20 DCB126/G 0.46 DCB127 0.22 SAVE ALL WARNINGS AND INSTRUCTIONS The undersigned is responsible for compilation of the technical FOR FUTURE REFERENCE file and makes this declaration on behalf of D WALT.
Page 9
English f ) Keep cutting tools sharp and clean. Properly of inattention while operating power tools may result in serious personal injury. maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. b ) Use personal protective equipment. Always wear eye protection.
English Mains Plug Replacement against toxic dust and fumes and ensure that persons within or entering the work area are also protected. (U.K. & Ireland Only) WARNING: Use this tool in a well‑ventilated area when If a new mains plug needs to be fitted: sanding ferrous metals.
English Do not use an extension cord unless it is absolutely • has reached an appropriate temperature, the yellow light will necessary. Use of improper extension cord could result in risk turn off and the charger will resume the charging procedure. of fire, electric shock, or electrocution.
Page 12
English Transportation The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions WARNING: Fire hazard. Transporting batteries can below. Then follow charging procedures outlined. possibly cause fire if the battery terminals inadvertently come into contact with conductive materials.
English Young children and the infirm. This appliance is not • 1. Grasp the tool and squeeze the Tool-Free accessory intended for use by young children or infirm persons clamp's 3 lever. without supervision. 2. Clean any residual debris from the tool shaft 15 ...
English To Install the Belt Hook 2. Adjust the length of the guide by pulling out or pushing inward to achieve the desired length as shown in Figure I. 1. Insert the hook into one of the slots, on left or right side, 3.
English installing attachments or accessories. An accidental the tool, the user will have to release the trigger and repress lock-on button. start‑up can cause injury. The charger and battery pack are not serviceable. LED Worklight (Fig. M) Lubrication The LED worklight 2 will activate when the trigger is depressed. It will automatically shut off following a short period of time Your power tool requires no additional lubrication.
English Protecting the Environment Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste. Products and batteries contain materials that can be recovered or recycled, reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions.