Lower Rack - Viking 7 Series Use & Care Manual

COLLAPSIBLE UPPER BASKET WIRES
You can use collapsible wires when you need a larger space for your
dishes in the upper basket of your machine.
To bring the collapsible wires into horizontal position, grab the wire
from the middle position and push them in the direction of arrow in
the figure. Place your larger dishes into the area created. To bring the
wires back to vertical position, just lift them up.
C
Bringing the wires to the horizontal position by holding
them from the tips may cause them to bend. Therefore,
hold the wires from their stems while bringing them to
the horizontal or vertical positions.
ADJUSTING THE HEIGHT OF THE UPPER BASKET
The upper basket height adjustment mechanism has been designed
for you to create large spaces in the lower or upper sections of your
machine depending on your needs by adjusting the height in the
upper or lower direction while your basket is empty or loaded.
Thanks to this mechanism, you can use your basket in three different
positions, namely lower, middle and upper positions (1, 2, 3).
1. To raise your basket, hold the upper basket wires with both hands
while the basket is in the lowermost position and pull them up
(A).
2. You will hear a "Click" from the right and left mechanisms,
indicating that the basket has reached the next level. Release the
basket.
Repeat the process if the height is not sufficient.
1
2
3
To lower the basket, while it is in the uppermost position;
1. Hold the upper basket wires with both hands, slightly lift up the
basket and simultaneously push and release the latches shown
in the figure (B).
2. Lower the basket from its current position to the lower one.
3. Release the basket after it has reached one level down.
Repeat the process if the height is not sufficient.
C
The movement mechanism may not function properly
if the upper basket is overloaded or if the weight
distribution is not balanced. In heavier conditions, there
is the risk of falling one level down.
C
Make sure that the adjustment mechanism has the
same positions on the right and left sides of the upper
basket.

4.2 LOWER RACK

COLLAPSIBLE LOWER BASKET TINES
There are foldable tines (A) located at the lower basket of the
machine are designed for an easier placement of large pieces such
as pans, bowls, etc. You can create larger spaces by folding each tines
individually or all of them at once.
To bring the collapsible tines into horizontal position, grab the tines
from mid position and push them in the directions of arrows (B). To
bring the tines back to vertical position, just lift them up. Collapsible
tines will click into the latch again (C).
7
USA