Tablet Detergents; Rinse Aid - Viking 7 Series Use & Care Manual

3. Push the lid of the detergent dispenser to close it. A "click" will be
heard when the lid is closed.
1 1
2
3
C
Use powder or liquid/gel detergent in short programs
without prewash since the solubility of the tablet
detergent changes depending on the temperature and
time.

7.2 TABLET DETERGENTS

In addition to the conventional tablet detergents, there are also
commercially available detergent tablets that show water softening
salt and/or rinse aid effect. Some types of these detergents contain
special-purpose components such as glass and stainless steel
protectors. These tablets show their effects up to a certain water
hardness level (59 gpg). Water softening salt and rinse aid must also
be used together with the detergent if the water hardness level is
above the mentioned level.
C
The best washing performance in dishwashers is
obtained by using detergent, rinse aid and water
softening salt individually.
C
Observe the instructions of the detergent manufacturer
on the package when using tablet detergents.
C
Contact the detergent manufacturer if your dishes are
wet and/or if you notice limescale spots particularly on
your glasses after the washing program is over when
using a tablet detergent.
When you switch to powder detergent from tablet
detergent:
1. Make sure rinse aid reservoir is full.
2. Make the appropriate rinse aid settings.

7.3 RINSE AID

C
The rinse aid used in dishwashers is a special
combination that aims to increase drying efficiency
and prevent water or lime stains on the washed items.
For this reason, care must be paid to have rinse aid in
the rinse aid reservoir and to use rinse aids produced
specially for dishwashers only.
1. Open the lid of the rinse aid reservoir with the help of the latch.
2. Fill the reservoir until "MAX" level.
3. Slightly press the point (B) of the reservoir lid to close it.
4. If there are stains on tableware items after washing, level must be
increased and if there is a blue trace after wiping them by hand, it
must be decreased. This is set to position 3 as factory default.
C
The rinse aid adjustment is described under "Adjusting
the amount of rinse aid" in the section for operating
the machine.
C
Wipe clean any spilled rinse aid outside the reservoir.
Rinse aid that spilled accidentally will cause foaming
and it will eventually decrease washing performance.
16
USA