Product Components; Using Your Cleaner - Hoover HF322TH User Manual

The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for
waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Wall Mount*
B. Touch Power Control
C. Main Body
D. Auto LED Light
E. Handheld Release Button
F. Tube
G. Nozzle Release Button
H. Nozzle Front LED stripe
I. Brushbar Release Cover Slider
J. Brushbar Release End Cap
K. Nozzle Window
L. Brushbar
M. Switch ON/OFF
N. Pre-motor Filter
O. Single Cyclone Vortex Finder
P. Single Cyclone System
Q. Dust Cup
R. Dust Cup Flap Release Button
PREPARING YOUR CLEANER
1. Assemble the tube to the nozzle until you hear it "click" into place. [1a]
2. Assemble the main body unit to the tube until you hear it "click" into place. [1b]
3. Fully charge the appliance battery by connecting the charger jack plug to the battery pack. [2a]
Charging time is approximately 2.5Hrs. It is possible also to charge the battery pack when released from the product. [2b]
The battery pack LED light will illuminate Red during charging and will turn White when fully charged. [3]
NOTE: To remove the nozzle press the nozzle release button and pull away from the main body.
NOTE: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner must be swich off. You can charge the removable battery pack also when released
from the product. It is normal for the charger to become warm to touch when charging.

USING YOUR CLEANER

There are three working modes
• STANDARD MODE: When you press the swich On/Off, The cleaner is ready to clean thoroughly with the main motorized
nozzle or motorized mini turbo nozzle. [4]
• TURBO MODE: Press the touch power control on the main body to fully power the product for hard cleaning tasks. [5]
• AUTO MODE: When the main motorized nozzle or Mini-Turbo Nozzle are removed, the product will automatically adapt
to the lowest power setting and turn on the Auto Led light. [6]
* Certain Models Only
S. Dust Cup Assembly Release Button
T. Battery Pack
U. Battery Pack LED Light
V. Battery Pack Charging Inlet
W. Battery Pack Release Button
X. Charger
Y. 2in1 Large dusting and furniture tool*
Z. 2in1 Crevice And Dusting Tool*
AA. Mini-Power Nozzle*
AB. Accessory Adaptor*
AC. Radiator Tool*
AD. Deep Cleaning Brush*
AE. Multi-Function Up To Top Tool*
AF. Long Flexible Crevice Tool*
AG. Wall Mounts Screws*
AH. Cleaning Tool
AI. Accessories Bag*
3
GB