Table of Contents
Advertisement
2nd
3rd
Time
Clock Set
NTP Settings
DST
Power On Delay
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
Default Input
Description
You can configure
Clock Set
or DST. Configure various time-related settings.
Select
Clock
Set. Select
Date
or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
" You can set the
Date
and
Time
directly by pressing the number buttons on the remote control.
Set up the server URL and time zone to use the network time.
Switches the DST (Daylight Saving Time) function on or off.
"
Start
Date,
End Date
and
Time Offset
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
Switch to preset source or another source when the main source device gets disconnected.
Select whether to restore the selected primary input source when a primary input source is activated.
" The
Primary Source Recovery
function is disabled if
Select a primary source to switch to when no signals are received from the current input.
Select a secondary source to switch to when no signals are received from the current input.
" The
Secondary Source
function is disabled if
Select the default input to switch to when the new input is disconnected. The
connected via cables.
"
Auto Source Switching
must be set to
are enabled only when
DST
is set to On.
Primary Source
is set to All.
Primary Source
is set to All.
Last Input
New Input
to enable the
Default Input
option only includes external inputs
option.
69
Advertisement
Table of Contents
