Samsung OMB Series User Manual page 67

2nd 3rd
Server Network Settings Connect to Server
MagicInfo Mode
Server Access
FTP Mode
Proxy Server
Device Name
Description
Connect to MagicInfo server.
" If you do use the TLS option, the server is configured to use https and data transfer is encrypted. (Port number: 7002)
" If you don't use the TLS option, enter the server IP address and port number. Use 7001 as the port number. (If you are
unable to connect to the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
" Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
number 7001, check with your server administrator to find the correct port number and then change the port number.)
" For the MagicInfo Server user guide, visit the following website: http://displaysolutions.samsung.com → Support →
Resources → MagicInfo Web Manual.
Select the appropriate MagicInfo Mode
" Supported content types may be limited while
" This function may not be supported depending on the model.
Allow or deny access to MagicInfo server.
Specify the FTP operating mode.
Set up your proxy server connection and related functions.
" Address / Port / ID and Password are enabled only when
Select or enter a device name.
This name can be shown on network device over the network.
depending on the environment where you are using the product.
MagicInfo Mode is set to Lite.
Proxy Server is set to On.
67