–
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disks
cable sockets
nal.
–
Slide positive terminal cover
–
Charge the 12-V battery. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
F01636-10
Read the accompanying KTM PowerParts fitting instruc-
tions.
(SX‑F EU/US, XC-F US)
–
Stick displacement sticker on the left and right of the side
cover.
–
Refuel. (
p. 24)
–
Attach the stickers included in the scope of supply (optional).
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
F03447-01
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
bt
to the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
ck
to the 12 V battery.
M5
2.5 Nm
(1.84 lbf ft)
H
must be mounted under screws
cm
with the claws toward the battery termi-
cn
over the positive terminal.
p. 20)
SETUP 2
cl
and
13