Prepare To Install The Oven; Power Connection - Samsung NV7B4355VAK User & Installation Manual

NOTE
Depending on the model, this oven comes in two types: single door and dual door.
Accessories
The oven comes with different accessories that help you prepare different types of
food.
Wire rack
Universal tray *
Meat probe *
NOTE
Availability of accessories with an asterisk (*) depends on the oven model.
FULL MANUAL_NV7B4355VAK_U4_DG68-01418C-00_EN.indd 7 FULL MANUAL_NV7B4355VAK_U4_DG68-01418C-00_EN.indd 7
Wire rack insert * Baking tray *
Extra-deep tray * Divider
2 Screws (M4 L25) Steam tray *

Prepare to install the oven

Phillips Screwdriver

Power connection

Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
L N
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
01 02 03
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5-2.5 mm².
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Rated current(A)
10 < A ≤ 16
16 < A ≤ 25
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
Drill
Minimum cross-sectional area
1.5 mm
2
2.5 mm
2
English 7
2022-02-22 오전 9:05:09 2022-02-22 오전 9:05:09