12.7 Interrupting the wash cycle
Press On/Off.
1.
The program is saved and the appliance switches off.
Press On/Off.
2.
Press
to resume the wash cycle.
3.
12.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
Press
for approx. 4 seconds.
▶
a All displays light up.
a As soon as the displays are off, the display shows
"00h:01m" and the residual water is pumped out.
a The cycle is cancelled and ends after approx. 1 minute.
12.9 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
Do not fully open the door until water noises have
▶
stopped and steam has subsided.
Please note the information on Preventing Material
1.
Damage → Page 6 .
Press On/Off.
2.
Basic Operation en-us
21