Basic Operation; Protection Against Unintentional Operation; Switching On The Appliance; Setting A Cycle - Bosch SHP78CM5N Use And Care Manual

en-us Basic Operation
Upper rack
Third rack
12 Basic Operation

Basic Operation

Basic Operation
12.1 Protection against unintentional
operation
Your dishwasher has a built in feature to help prevent
unintentional operation, e.g. by children. After starting the
appliance, the door has to be closed within 4 seconds,
otherwise the operation will be paused. If this occurs,
follow the steps below to restart your dishwasher.
For top button controls: Press
1.
For front button controls: Close the door and press
2.
a The wash cycle will resume.
Notes
¡ Unintentional operation is activated when:
– Pressing Start to begin a wash cycle
– Setting Delay time and pressing Start
– Opening the door while Delay time is active
– Opening the door during a wash cycle.
¡ This feature cannot be deactivated.
20
a The cycle is set and the cycle button flashes.
a The remaining run time of the cycle appears on the
a The option is set and the option button flashes.
a The wash cycle has ended when the display shows
and close the door.
⁠ .
12.2 Switching on the appliance
Touch with a short 1 second touch.
▶
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
Press the right cycle button.
▶
display.
12.4 Setting options
You can set options to complete the chosen wash
program.
Note: The available options depend on which program is
selected.
Press the button for the relevant option.
▶
12.5 Setting the time delay
You can delay the start of the wash cycle via the
Home Connect® app.
Open the Home Connect® app and select the
▶
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
12.6 Starting the wash cycle
Press .
▶
"00h:00m".
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→ "Terminating the wash cycle", Page 21
¡ To save energy, the appliance switches off
automatically 10 minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.