Fiat PANDA Owner's Handbook Manual page 76

INSTALLING AN ISOFIX
CHILD CARSEAT
93) 94) 95) 96)
The outer rear seats of the vehicle are
equipped with ISOFIX anchorages,
a European standard which makes
fitting a child restraint system quick,
simple and safe.
The ISOFIX system lets you install the
ISOFIX child restraining system without
using the car seat belts but connecting
them directly to the carseat with three
anchors in the car. Traditional child
restraint systems can be fitted
alongside ISOFIX child restraint systems
on different seats in the same vehicle.
To install an ISOFIX child restraint
system, attach it to the two metal
anchorages A fig. 70 located where the
rear seat cushion meets the backrest,
then fix the upper strap (available
together with the restraint system) to
the dedicated anchorage B fig. 71
located at the bottom behind the
backrest.
As an example, fig. 72 shows an
example of a Universal ISOFIX child
restraint system for weight group 1.
74
70
71
IMPORTANT The fig. 72 is indicative
and for assembly purposes only. Fit the
child restraint system according to
the instructions, which must be
included.
F1D0060
72
F1D0061
F1D0059