Installing An Os; Installing From A Cd-Rom; Expresscard; Installing An Expresscard - National Instruments NI PXI-8110 User Manual

Note
Recovering the OS erases the contents of your hard disk. Back up any files you want
to keep prior to the recovery.

Installing an OS

Installing from a CD-ROM

Note For additional assistance with installing or changing an operating system, refer to
KnowledgeBase 2ZKC02OK: Hard Drive Recovery and OS Installation for PXI and VXI
Controllers at

ExpressCard

Installing an ExpressCard

© National Instruments Corporation
NI PXI-8110 controllers include a pre-installed OS. In some cases, you
may want to install a different OS. When doing so, consider the following
guidelines.
The NI PXI-8110 supports the installation of Windows 7, XP, and Vista
from a USB CD-ROM.
As an alternative to a USB CD-ROM drive, you can use an external SCSI
CD-ROM with a PXI-SCSI adapter.
.
ni.com/support
This section provides information on the installation and removal of
™
ExpressCard modules.
You can install an ExpressCard module while the NI PXI-8110 is running.
The NI PXI-8110 will automatically detect the card. ExpressCards are
generally marked with a symbol or a label to indicate which end to insert
into the slot. The cards are keyed to prevent incorrect insertion.
To install an ExpressCard, complete the following steps.
1. Hold the card so the top side is facing left.
2. Insert the card until it is completely seated in its connector. The
connector has an automatic eject mechanism. If you insert the card and
it is ejected, simply re-insert the card until it is seated.
If you encounter too much resistance, do not force the card. Check the card
orientation and try again.
Chapter 2
2-25
Installation and Configuration
NI PXI-8110 User Manual