Advertisement
Problem
Drawer will not open (no
beeping, no wash
underway)
Power failure during cycle
Continuous beeping with
A/F code in display
Intermittent beeping
High-pitched, subtle
beeping during a wash
program
Dishwasher will not start
Fan noise coming from the
dishwasher after a wash
program has finished
https://producthelp.fisherpaykel.com/eu/Clean/DishDrawer%E2%84%A2/Double/DD60DAHX9/User_Guide_DD60DAHX9/13_...
Possible Cause
Childlock feature is on or
the 'Closed drawer
autolock' option is on, or
both.
Closed drawer auto lock
is on.
Power outage in your
home or area.
A fault has occurred.
Dishwasher is in pause
mode.
Rinse aid is being
dispensed.
Power supply is not
connected.
The drawer is not closed
properly.
Keylock or Childlock
feature is on.
button not pressed.
Dishdrawer™ is in
"Showroom mode".
This is normal. The
drying fan continues to
run for a set period of
time after a program has
finished to assist with
drying.
What to Do
Turn the Childlock off. See your Quickstart guide
for instructions.
Press any button and open drawer within 30
seconds.
Wait until power resumes, cycle will restart in
same part of wash program.
Refer to section
'If there is a
Close the dishwasher and press the
button to resume the program.
This is normal and needs no action.
Connect the power supply.
Ensure the drawer is firmly closed.
Turn the Keylock or Childlock off. See your
Quickstart guide for instructions.
Press the
button.
Contact Customer Care.
No action required. The fan will automatically stop
after the set time is over, or when the drawer is
opened. In some cases, the fan may resume when
the drawer is closed again.
Updated: Wed, 06 Sep 2023 03:43:20 GMT
fault'.
Powered by
3
Advertisement
