Advertisement
Problem
Hard Water
Foaming
Water leaking
https://producthelp.fisherpaykel.com/eu/Clean/DishDrawer%E2%84%A2/Double/DD60DAHX9/User_Guide_DD60DAHX9/13_...
Possible Cause
Wrong type of detergent
used
Incorrect amount of
detergent.
Too much egg in the
wash load.
Rinse aid setting too
high.
Rinse aid dispenser plug
not closed properly.
Drain hose disconnected
from waste pipe.
Water inlet hose not
properly connected.
Other leaks.
Rinse aid dispenser plug
not closed properly.
What to Do
Increase the rinse aid setting and the amount of
detergent. See section
'Water hardness and
dishwashing'.
Models with built in water softener
('H' models only):
Increase the water softener setting. See section
'Water
softener'.
Models without built in water softener: If living in
an area with very hard water, consult a plumber on
installing a household water softener.
ONLY use detergents for Dishwashers. See
'Adding
detergent'.
See section
'Wash programs and detergent
quantities' or follow the detergent manufacturer's
instructions.
Increase the amount of detergent.
Decrease the rinse aid setting.
Ensure that the rinse aid dispenser plug is closed
tight, with its hand grip pointing straight ahead.
See section
'Using rinse
Reconnect the drain hose to the waste pipe.
Ensure the inlet hose is connected securely.
Turn water and power supplies to the dishwasher
off. Call Customer Care or your Authorized
Service Centre. See your 'Service and warranty'
booklet for contact details.
Ensure that the rinse aid dispenser plug is closed
tight, with its hand grip pointing straight ahead.
See section
'Using rinse
Updated: Wed, 06 Sep 2023 03:43:20 GMT
aid'.
aid'.
Powered by
2
Advertisement
