Functions/Programmes Selec- Ted By Pressing The Function Keys For 3 Seconds - Smeg WDN064SLDIN User Manual

• Steam
This function helps reduce wrinkles, reduce
ironing times and soften and remove dirt
from your cotton, synthetic and mixed laun-
dry.
*Under conditions where the steam func-
tion is applied at the end of the program,
your clothes may be warmer at the end of
the washing. This is expected within the
program operating conditions.
do not use liquid detergents when
you activate the steam function un-
less you have a liquid container or
liquid detergent dosing capability.
There is a risk of stain on the laun-
dry.
• Drying
This function allows the laundry to dry after
washing. Check in the programme table
with which programmes this auxiliary func-
tion can be selected.
6.11.2 Functions/Programmes Selec-
ted by Pressing the Function
Keys for 3 Seconds
• Drum Clean +
Press and hold the corresponding auxiliary
function button for 3 seconds to select the
program. Use regularly (every 1-2 months)
to clean the boiler and ensure proper hy-
giene. Steam is applied prior to the pro-
gram to soften debris from the boiler. Run
the program when the machine is com-
pletely empty. For a more efficient result,
place a suitable powder descaler (boiler
cleaning agent) in washing machines in the
detergent eye "2". This program includes
the drying step after the boiler cleaning pro-
cess to dry the inside of the machine.
This is not a washing program. This
is a maintenance program.
Do not run this program with any-
thing inside the machine. When you
try to start, the machine automatic-
ally detects that there is a load in-
side, you can end the program or
continue the program depending on
your machine model. Active clean-
ing will not occur if the program
continues.
• AntiCrease+
Pressing and holding the corresponding
auxiliary function button for 3 seconds will
select this function and the program track-
ing light of the corresponding step will illu-
minate. When this function is selected, the
program will ventilate for up to 8 hours to
prevent wrinkles at the end of the cycle.
During this 8-hour period, you can cancel
the program and take off your clothes at
any time. Press the function selection key
or the machine on/off key to cancel the
function. The program tracking light stays
on until the function is cancelled or the step
is complete. If the function is not cancelled,
it remains active during subsequent wash
cycles.
• Child Lock
Using the child Lock feature, you can pre-
vent children from tampering with the ma-
chine. This way, you can prevent changes
to an ongoing program.
With the child Lock engaged, you
can switch the machine on and off
with the on/off button. When you
start the machine again, the pro-
gram resumes where it left off.
If the buttons are pressed while
child Lock is active, the audible
warning sounds. If the buttons are
pressed five times in a row, the
buzzer cancels.
EN / 34