Spin Speed Selection - Smeg WDN064SLDIN User Manual

Press the Temperature Adjustment button
to change the temperature. Temperature
decreases gradually.
No change can be made in pro-
grammes where temperature ad-
justment is not allowed.
You can also change the temperature after
the washing starts. This change can be
made if the only washing steps allow it.
If you scroll to cold wash option
and press Temperature Adjustment
button again, the recommended
maximum temperature for the se-
lected programme appears on the
display. Press the Temperature Ad-
justment button again to decrease
the temperature.

6.7 Spin Speed Selection

Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold l_l " and "No Spin _"
options appear on the display.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent your laundry from getting
wrinkled when there is no water in the ma-
chine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start/Pause button. The pro-
gramme will resume. Machine drains
the water and spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do
not allow it.
Auxiliary function selection for drying:
When you select a new washing program,
press the Auxiliary Function Selection but-
ton to set the drying option suitable for this
program.
In programmes where drying set-
ting is not allowed, when the drying
auxiliary function button is pressed,
the drying light doesn't change and
a warning sound is heard.
For only drying programmes, set
the appropriate drying option by
pressing the Auxiliary Function Se-
lection button.
EN / 28