Power Steering Fluid Check - Ford F 2019 Series Owner's Manual

POWER STEERING FLUID
CHECK
E161557
Motorhome (TY3) Canada/United States of America, enUSA, Edition date: 201803, First-Printing
Maintenance
Note: The power steering cap has both a
cold and hot indicator on the dipstick.
1. Start the engine and let it run until it
reaches normal operating temperature
(the engine coolant temperature gauge
indicator will be near the center of the
normal area between H and C).
2. While the engine idles, turn the steering
wheel left and right several times.
3. Turn the engine off.
4. Check the fluid level on the dipstick. It
should be between the arrows in the
FULL range on the side of the dipstick
with the words MAX. HOT at the top.
Do not add fluid if the level is within
this range.
5. If the fluid is low, add fluid in small
amounts, continuously checking the
level until it reaches the FULL range.
Be sure to put the dipstick back in the
reservoir.
Steering linkage lubrication points
There are nine lubrication points on the
steering linkage: See Capacities and
Specifications (page 137).
103