Example 1: Antenna Or Cable, With A Vcr, And Splitting The Signal - Sony SVR-2000 Setup Manual

Note
If you have cable with a set-top box and if
you want to split the signal, use the following
procedure.
1 Attach the RF splitter to the RF Coaxial
cable coming out of the wall, before it
connects to the cable box.
2 Connect one of the RF Coaxial cables
coming from the RF splitter to the RF In
jack on the back of your set-top box.
3 Connect the set-top box's RF Out jack to
the SVR Recorder's RF In jack using an
RF Coaxial cable. This will let the SVR
Recorder record your premium channels
normally.
4 Attach the other RF Coaxial cable coming
from the RF splitter to your TV or VCR's
RF In. You won't be able to watch
premium channels with this connection,
but other channels will work fine if your
TV or VCR is cable-ready (which most
are).
16
Connection Examples

Example 1: Antenna or cable, with a VCR, and splitting the signal

SVR
AC In
Recorder
VCR
TV
Splitter
OUT
IN
OUT
Phone Cntrl Inputs Outputs RF
Line Out In
Serial
Audio
R L Video S-Video S-Video
Ch
IR
3/4
RF
Out
Antenna
or
Audio
In
R L Video
IN
Ch
3/4
OUT RF
Out
Antenna In
Audio Video S-Video
A
R L
B