Table of Contents
Advertisement
CONTROLS AND FEATURES
NOTE:
• This feature is greyed out when Audio Delay is
in Auto.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
• When the optical digital output setting
t
(Auto
PCM) is changed, it may be necessary
to adjust the timing again.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
Using HDMI CEC Control
This is a new feature that uses CEC technology
and allows you to control Toshiba HDMI CEC
Control compatible devices from the television
remote control via HDMI connection (page 10).
When the Enable HDMI CEC Control item in the HDMI
CEC Control Setup menu is set to On, individual
functions also set to On will be activated.
Enable HDMI CEC Control
a
Press
b
c
Press
and
Setup and press OK.
c
Press
B
/
b
and press OK.
B
b
Press
/
< HDMI CEC Control Setup
Enable HDMI CEC Control
TV Auto Power
Auto Standby
Amplifier Control
Initial Speaker Setting
NOTE: If you set Enable HDMI CEC Control to
Off, all other items will be greyed out.
TV Auto Power
The TV Auto Power setting allows the television to be
automatically switched on if an HDMI CEC Control device
a
In the HDMI CEC Control Setup menu, press
to highlight TV Auto Power.
b
Press
c
and
80
and
B
/
b
to highlight Options icon.
B
b
/
to select HDMI CEC Control
to select Enable HDMI CEC Control
and OK to select On.
On
On
Off
On
On
On
TV Speakers
is turned on.
B
/
b
to select On or Off.
b
Advertisement
Table of Contents
