Table of Contents
Advertisement
Digital settings – other settings
Subtitles
In DTV mode, this feature will show subtitles on the screen
in the selected language provided they are being
broadcast.
a
In the DTV Settings menu, press
Subtitle and Audio and press OK.
b
Press
B
/
b
to select Subtitle Display and press
c
B
b
and
/
to select On or Off.
< Subtitle and Audio
Subtitle Display
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Audio Type
Primary Audio Language
Secondary Audio Language
c
B
b
Press
/
to select Primary Subtitle Language
or Secondary Subtitle Language and press
and
B
/
b
to select an option.
The SUBTITLE button can be used to select subtitle on or
off for the current channel only and to select the subtitle
language if more than one subtitle is available.
DVB Character Set
a
In the DTV Settings menu, press
DVB Character Set and press OK.
b
Press
c
and
B
/
b
alphabet 2, West or Latin alphabet 9.
Audio languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided multiple
language tracks are being broadcast.
a
In the Subtitle and Audio menu, press
select Audio Type and press
select Normal, For Hard of Hearing or Audio
Description and press OK.
b
B
b
Press
/
to select Primary Audio Language
or Secondary Audio Language and press
B
b
/
to select an option.
If more than one soundtrack is available, use the
s button to select between them.
B
b
/
to select
Off
Normal
English
English
Normal
English
English
c
B
/
b
to select
to select Standard, Latin
B
b
/
c
B
b
and
/
to
c
and
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
a
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
b
Press
icon.
c
Press
c
and
press OK.
d
B
Press
/
press OK.
e
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
• Some CI or CI+ CAM may not be supported.
Stored CICAM PIN
Stored the CICAM PIN is used for recording.
a
Press
icon.
b
Press
c
and
press OK.
c
B
Press
/
press OK.
d
Input PIN code on the Stored CICAM PIN dialog
window and press Done.
to
NOTE: Note relating to cards for which the CAM PIN can
be changed through the Common Interface: If you change
the PIN through the Common Interface after setting the
stored PIN, it invalidates the stored PIN, which you must
change in a separate operation.
75
CONTROLS AND FEATURES
provider.
B
b
and
/
to highlight Installation
B
/
b
to select DTV Settings and
b
to select Common Interface and
B
b
and
/
to highlight Installation
B
/
b
to select DTV Settings and
b
to select Stored CICAM PIN and
Advertisement
Table of Contents
