Cleaning The Drip Tray And Coffee Dregs Container; Cleaning The Milk Container; Service Programmes - Siemens EQ.700 integral TQ7 Series Information For Use

Fully automatic espresso machine
Hide thumbs Also See for EQ.700 integral TQ7 Series:
Table of Contents

Advertisement

Available languages

Available languages

en Cleaning and servicing
Note: The appliance will rinse itself
automatically if you switch it on when
it is cold or switch it off after it has
dispensed coffee. The system is
therefore self-cleaning.
14.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits. Follow the illus-
trated instructions at the beginning of
this manual.
→ Fig.
 - 
25
26
14.5 Cleaning the milk con-
tainer
Clean the milk container regularly for
hygiene reasons. You can clean the
milk container in the dishwasher. Fol-
low the illustrated instructions at the
beginning of this manual.
→ Fig.
 - 
17
18
14.6 Service programmes
Use the service programmes if you
insert or remove a water filter or in
order to clean your appliance thor-
oughly. Your appliance will tell you
when you need to perform a service
programme, e.g. cleaning.
Overview of service programmes
You can find an overview of the service programmes here.
Note: The start image shows the remaining number of beverages that can be
dispensed until running the programme and the duration.
26
INTENZA filter
ATTENTION!
Improper cleaning and descaling or a
delay in doing so may damage the
appliance.
Immediately perform the descaling
process in accordance with the in-
structions.
Only use cleaning tablets in the
tablet compartment.
Do not put descaling tablets or
other products in the tablet com-
partment.
Notes
The display indicates the progress
¡
of the descaling or cleaning pro-
cess.
If your appliance has been locked,
¡
you can only operate it again once
the descaling process has been
carried out.
Tip: In addition to the automatic rins-
ing process, regularly also remove
and clean the brewing unit.
Using the service programmes
Press
⁠ .
1.
Press the symbol for the required
2.
programme.
The display will guide you through
a
the programme.
Insert, replace or remove the water fil-
ter.

Advertisement

Table of Contents
loading

Table of Contents