Advertisement
Operation
Manual Controls
1. Place the fan on a table or flat surface. Plug the cord set into an appropriate electrical
outlet.
2. Turn the fan on by pressing the 'POWER' button. Turn the fan off by pressing the
'POWER' button again.
3. You can adjust the fan speed to the desired level: low, medium and high by pressing
the 'SPEED' button. The speed setting is displayed on the LED panel.
4. You can adjust the fan mode by pressing the 'MODE' button. The four modes are
'natural' 'normal' 'sleep' and 'child'.
5. To set the fans timer, press the 'TIMER' button. This allows you to set the fans length
of operation between 1-12 hours.
6. To make the fan oscillate, press the 'OSC' button. This allows the fan to oscillate up
to 75° .
7. Turn the LED display temporarily off by pressing the 'LED' button on the remote
or by pressing and holding the 'SPEED' button on the control panel for more than
3 seconds. The display will light up again once any control button is pressed.
8. Turn on the Nightlight by pressing the 'LIGHT' button on the remote or on the
control panel. Turn the Nightlight off by pressing the 'LIGHT' button on the remote
or on the control panel.
Cable Hook:
The cable hook is packed in the user manual,Take it out and install it on the backside
of the fan. The power cord can be hanged at the cable hook when the fan is not in
use.
9
Advertisement
