Sony CLIE PEG-NX73V Frequently Asked Questions Manual page 27

I cannot perform the HotSync
B If a prefix is required, select the Dial prefix check box in the Phone
Setup screen and enter the correct phone number.
B Check whether you can hear any noise coming from your service line.
In some cases, a line may be interrupted by noise interference.
B When using a modem other than a CF modem card, check the battery
power of the modem.
Checking your computer
B Check that your computer is turned on and the automatic shut-off setting
in the power saving mode is disabled.
B Check that the modem is properly connected to the service line.
B Click the HotSync
and check that the Modem check box is selected.
B Check that the modem connected to your computer is turned on. You cannot
turn on a modem with your CLIÉ handheld if the Auto-Off feature is set.
B Check that the modem is properly connected to the serial port of your
computer.
B Check the Setup string setting in the Setup window of the HotSync
Manager.
b
For details, refer to the manual of your modem.
B If problems arise when the Speed in the Setup/Modem window is set to
As fast as possible or some other specific speed, reduce the
transmission speed setting.
B Check that the Speed setting in the Setup/Modem window is
appropriate for your modem.
B Turn off the modem for a while and turn it on again. Then reconnect the
modem.
®
operation via a modem
icon at the bottom right of your computer screen,
Continued on next page
27