Table of Contents
Advertisement
Next steps
1. Install the
memory
module.
2. Install the
wireless
card.
3. Install the
solid-state
4. Install the
rear
cover.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
USB board
Removing the USB board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
rear
cover.
5. Remove the
solid-state
6. Remove the
wireless
card.
7. Remove the
memory
module.
8. Remove the
system
board.
NOTE:
The system board can be removed as an assembly with the fan and heat-sink assembly, ethernet and audio
board, and USB board attached.
About this task
The following image indicates the location of the USB board and provides a visual representation of the removal procedure.
Steps
1. Turn the system-board assembly over.
78
Removing and installing Field Replaceable Units (FRUs)
drive.
After working inside your
Before working inside your
drive.
computer.
computer.
Advertisement
Table of Contents
