Craftsman 9096-31B202 316350840 Operator's Manual page 6

SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or caution.
May be used in conjunction with other
symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
Operator's Manual(s) and follow all
warnings and safety instructions.
Failure to do so can result in serious
injury to the operator and/or
bystanders.
• WEAR EYE, HEARING AND
HARDHAT PROTECTION
WARNING:
and loud noise can cause severe eye
injury and hearing loss. Wear eye pro-
tection meeting
Z87.1-1989 standards and ear protec-
tion when operating this unit.
Wear a hard hat. Use a full face shield
when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the
proper type of oil.
RULES FOR SAFE OPERATION
Read the
Thrown objects
ANSI
SYMBOL MEANING
• ON/OFF CONTROL
• ON/OFF CONTROL
• USE BOTH HANDS
1
• RED CHOKE LEVER POSITIONS
2
3
6
ON / START / RUN
OFF OR STOP
• GUIDE BAR
WARNING:
Contact of the
guide bar tip with any object should
be avoided. Tip contact may cause
the guide bar to move suddenly
upward and backward, which may
cause serious injury.
Always use both hands while operat-
ing the chain saw. Never use only one
hand to operate the saw.
1 • FULL Choke Position
2 • PARTIAL Choke Position
3 • RUN Position