Dvc's Usb Drivers - JVC MP-XP7230GB Manual

4. When the software has been set up, a prompt for PC restarting appears. Click
[Finish] to restart the PC.
Cautions
This setup cannot install all DVC utilities.
After you have set up the original software, plug the DVC cable into the USB socket of your
PC. The device type will be recognized automatically and setup of its USB driver will start
up.

DVC's USB Drivers

The DVC connection and the USB driver to be set up vary depending on the DVC model you use.
For details, see the DVC instruction manual.
1. Connect the DVC to the USB connector of your PC.
2. The hardware installation screen will appear.
3. Select the "Install the software automatically" option and click [Next].
Cautions
• The driver to be set up depends on the DVC operation mode.
• There is no operation problem although the "has not passed Windows Logo testing... "
message appears.
1) If "The hardware: JVC DV Camera Storage" message appears:
25
EN