Sony XNV-660BT Operating Instructions Manual page 19

Reception controls
Touch the display if the reception controls are not shown.
No. Item
"Source List"
1
"ATT"
2
3 "Navi"
4 "Top"
m/M
5
./>
6
"Band"
7
"Receive Menu"
8
"Preset List"
9
"PTY List"
0
Indications during reception
A B
Source List ATT
Band
15
C
1 2
Source List ATT
15
5 6 7
Touch to
open the source list. (page 13)
attenuate the sound. To cancel, touch again.
enter the navigation mode. (page 17)
open the top menu. (page 13)
tune manually.
Touch and hold to skip frequencies continuously.
tune automatically.
open the band list and change the band.
open the receive menu, which contains the following.
• "Mono": Touch to activate the monaural mode if FM reception
is poor. To restore stereo reception, select "OFF."
• "Local": Touch to only tune into stations with stronger signal.
To tune normal stations, select "OFF."
• "IF": Touch to set to "Wide" to hear FM stereo broadcasts in
stereo and with full frequency reception. To narrow the
reception frequency automatically to eliminate noise, select
"Auto."
list up stored stations, or store stations. (page 24)
open the PTY list. (page 25)
A Current source icon*
B Band number, Preset number*
C Volume level*
Navi Top
D Setting status (CSO, EQ7, RBE)
*1 Appears only when the controls are shown.
*2 Appears only when the station stored in memory is
*3 When ATT is activated,
Receive Preset PTY
Menu List List
12:00
D
3 4
Navi Top
Receive Preset PTY
Band
Menu List List
12:00
8 9 0
1
3
received.
2 , Frequency/status
appears.
19