Nvraid Management Utility; Viewing Raid Array Configurations - MSI K9NBPM2-FID Series Manual

M S-7252 M ainboard

NVRAID Management Utility

There is an application called NVRAIDMAN which helps you perform the following
tasks of nVDIA RAID.

• Viewing RAID Array Configurations

View an array configuration (mirrored, striped, or any supported combination)
• Setting Up a Spare RAID Disk
• View free and/or dedicated free disks
• Designate a free disk to a particular array
• Creating RAID Arrays
• Deleting a RAID Array
• Morphing From One RAID Array to Another
• Hot Plug Array
• Initializing a RAID Array
• Erase the data on the array by writing all zeros to the sectors of each hard
disk.
• Rebuilding a RAID Mirrored Array
• Rebuild a broken mirrored array
• W atch the progress of rebuilding an array
• Only applies to RAID 1 arrays
• Synchronizing a RAID Array
• Rebuild the redundancy in RAID 1 arrays (copy the data to the
redundant disk—the same operation as rebuilding)
Viewing RAID Array Configurations
To view your RAID configuration from W indows, launch the NVRAID Management
utility.
The RAID configuration information appears in the right-side pane, as shown below.
Important
The information in the figures in this part may very from what it is shown in
your system.
B-12