Mounting On A Wall - Philips 43BDL2050Q Manual

1.4.

Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend
using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America.
43BDL3110Q/43BDL205Q0
VESA Grid
Table
1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface
so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in
damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting
bracket) and tighten them securely.
5. The equipment and its associated mounting means still remain secure during the test. For use only with UL Listed Wall
Mount Bracket with minimum weight/load of the weight of the unit.
1.4.1. VESA Grid
43BDL3110Q/43BDL2050Q
50BDL3110Q/50BDL2050Q
55BDL3110Q/55BDL2050Q
65BDL3110Q/65BDL2050Q
1.4.2. Weight of the unit
43BDL3110Q/43BDL2050Q
50BDL3110Q/50BDL2050Q
55BDL3110Q/55BDL2050Q
65BDL3110Q/65BDL2050Q
Protective Sheet
200(H) x 200(V) mm
200(H) x 200(V) mm
200(H) x 200(V) mm
300(H) x 200(V) mm
8.4 kg
12.0 kg
14.0 kg
21.0 kg
50BDL3110Q/50BDL2050Q
55BDL3110Q/55BDL2050Q
65BDL3110Q/65BDL2050Q
VESA Grid
Table
2
Protective Sheet