Philips 43BDL2050Q Manual page 24

Language
HDMI Version
Power On Mode
Boot On Source
Advanced
Boot Wake
RS322 Control
Pixel Shift
Uplayer Setting
Restore
Notes: To wake up PD in the HDMI source, you can set HDMI wakeup "On".
This product supports timed shutdown and timed startup functions. Refer to the "Shutdown time/Startup time" in the upper
table for details.
English
中文（中国）
HDMI1.4
HDMI2.0
Power On
Standby
Last Status
Switch
Boot On Source
Play List
UART Wake
HDMI/VGA Wake
On/Off
On/Off
Switch
Repeat Time
Restore Default
On/Off
HDMI1/ HDMI2/ PDF/ Media/
Cloud CMS/ Customer/ Last
Source/ VGA/ USB
Play list [1 ... 7]
On/Off
On/Off
On/Off
8S/16S/24S/32S
Cancel/OK
17
Available only 43X8050
1. When SCHEDULE is set with
startup time, but the startup time
has not arrived yet, boot the device
according to the signal source set in
the "Boot On Source".
2. If the source is set in USB,
the booting page is the "U disc
homepage".
1.Play List is grayed
2.When the Boot On Source is
PDF or Media Player, Play List is
available.
When UART wake = On，RC off or
power saving can both be waken up
by UART wake.
When HDMI Wake = On, and the
current source is HDMI1/2, power
saving and the current HDMI source
are waken up with signals.
1.When Uplayer Setting switch
on, Boot On Source is grayed, the
setting is unavailable.
2.Supported file name：SuperU
3. To play content in UPlayer, the
system will cut the signal source
to USB, and stay at the USB source
when plugging and unplugging the
USB flash drive.
4. Pivot jump to U_Player when
booting, the priority is higher than
the source specified by the schedule
boot
Supported file type：
1、Photo: ".png", ".jpg"
2、Video: ".dat", ".vob", ".ts", ".mkv",
".mov", ".3gp", ".flv", ".webm",
".wmv", ".asf", ".mp4", ".avi", ".mpg".
System Reset