National Instruments PXI-7854 Getting Started page 4

Installing the NI 78 xx R
You can install the NI PCI/PCIe-78xxR in any available PCI/PCI Express expansion slot in the computer,
and the NI PXI-78xxR in any available peripheral slot in the PXI or CompactPCI chassis. To achieve the
best noise performance, leave as much room as possible between the NI PCI/PCIe-78xxR and other
boards.
Note
You must install the software before installing the hardware. For software installation
information, refer to
1. Power off and unplug the computer or PXI chassis.
Caution
Refer to the Read Me First: Safety and Electromagnetic Compatibility document packaged
with your PXI chassis or device before removing equipment covers or connecting or disconnecting
any signal wires.
2. Remove the computer cover and/or the expansion slot cover on the computer, or the filler panel of
an unused PXI slot on the PXI chassis.
3. Touch any metal part of the computer or chassis to discharge any static electricity.
4. For the NI PCI/PCIe-78xxR, insert the device into the applicable PCI/PCI Express system slot on
your computer. Gently rock the device into place. Do not force the device into place. For the
NI PXI-78xxR, insert the device into the PXI slot. Use the injector/ejector handle to fully inject the
NI PXI-78xxR into place.
1 NI PCI/PCIe-78 xx R Device
© National Instruments Corporation
Step 1. Install Application Software and
1
2
2 PCI/PCI Express System Slot
Figure 2. Installing an NI PCI/PCIe-78 xx R Device
3
Driver.
3
3 PC with PCI/PCI Express Slot
Getting Started with R Series Multifunction RIO