How To Use; Before Use - LG GR-D24 Series Owner's Manual

HOW TO USE

Before use

Clean the fridge.
Clean your fridge thoroughly and wipe off all dust that may have
accumulated during shipping.
y
y
Connect the power supply.
Check if the power supply is connected before use.
Read the "Turning On The Power" section. (Your plug type might be
different from the picture.)
Wait for the fridge to cool.
Allow your fridge to run for at least three to four hours before putting
food in it. Check the flow of cold air in the freezer compartment to ensure
proper cooling.
Putting food in the fridge before it has cooled could cause the food
to spoil, or a bad odor could remain inside the fridge.
The fridge makes a loud noise after initial operation.
This is normal. The loudness will decrease as the temperature lowers.
Before Plugging in, open the fridge doors to ventilate the interior.
The inside of the fridge may smell like plastic at first. Remove any
adhesive tape from inside the fridge and open the fridge doors for
ventilation until any odors have subsided.
CAUTION
Do not scratch the fridge with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing
any tape or adhesive from the fridge,.
Do not peel off the model or serial number label or the technical
information on the rear surface of the fridge.
NOTE
Remove adhesive residue by wiping it off with your thumb or
dishwashing detergent.
CAUTION
HOW TO USE
15