Philips 50PUH8808/96 User Manual page 32

Ambisleep
Ambisleep simulates sunset to help you unwind before
you fall asleep. At the end of simulation, display will
automatically switch to standby.
Ambisleep on
 Settings > Display &
Sound > Ambilight > Ambisleep > Start Ambisleep.
Select to turn on Ambisleep.
Duration
 Settings > Display &
Sound > Ambilight > Ambisleep > Duration.
Set the duration (in minutes) of the Ambisleep.
Brightness
 Settings > Display &
Sound > Ambilight > Ambisleep > Brightness.
Set the starting brightness of the Ambisleep.
Color
 Settings > Display &
Sound > Ambilight > Ambisleep > Color.
Select the light color of your preference.
Sound
 Settings > Display &
Sound > Ambilight > Ambisleep > Sound.
Select the nature sound you like to use during
Ambisleep.
The available nature sounds are:
• Campfire
• Rain
• Rainforest
• Tropical beach
• Waterfall
• Silent
Lounge Light Mode
The lounge light mode of your display allows you to
switch on the Ambilight when the display is in standby.
So you can light up your room with Ambilight.
Enable lounge light mode
 Settings > Display & Sound > Ambilight > Lounge
light > Enable on standby.
Switch on to allow lounge light mode activated when
display is on standby.
After you have switched your display to standby and
wish to switch on the Ambilight lounge light, follow
these steps:
1 - Press AMBILIGHT key on remote control to actavite
Ambilight lounge light.
2 - Press navigation keys  (left) or  (right) to change
different light effects.
3 - Press navigation keys  (up) or  (down) to adjust
the brightness.
4 - To switch off the Ambilight lounge light,
press AMBILIGHT key again.
Duration
 Settings > Display & Sound > Ambilight > Lounge
light > Duration.
Set the duration (in minutes) of the Lounge light mode.
Advanced Ambilight Settings
Brightness
 Settings > Display &
Sound > Ambilight > Advanced > Brightness.
Press the Arrow / navigation keys to set the level of
Ambilight brightness.
Saturation
 Settings > Display &
Sound > Ambilight > Advanced > Saturation.
Press the Arrow / navigation keys to set the level of
Ambilight saturation.
Neutralise the influence of a colored wall on the
Ambilight colors
 Settings > Display &
Sound > Ambilight > Advanced > Wall color.
32