Connecting The Terminal Box; Opening And Closing The Terminal Box - Siemens SIMATIC HMI 177 Operating Instructions Manual

4.2

Connecting the terminal box

4.2
4.2.1

Opening and closing the terminal box

Introduction
Please note:
Caution
Short circuits in the terminal box can impair the function of the Mobile Panel 177.
When carrying out work in the opened terminal box ensure that conductive materials, such
as cable residues, do not come into contact with electrical circuits.
Caution
When working in the open housing, ensure that current-carrying conductors do not come into
contact with electrical circuits.
Note the ESD instructions.
Requirements
Torx screwdriver, Size 2
Procedure
Figure 4-1
①
②
③
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005
Opening the terminal box – example with Terminal Box DP
Screws
Cover
Screwed connections
Mounting and Connection
4.2 Connecting the terminal box
4-3