Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7746
Summary of Contents for NCR 7746
- Page 1 Kit Instructions 7746 Battery Assembly 9700-0060-7746 / 9700-0061-7746 Issue A...
-
Page 2: Revision Record
The product described in this document is a licensed product of NCR Corporation. NCR is a registered trademark of NCR Corporation. NCR POS is a trademark of NCR Corporation in the United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. - Page 3 7746 Battery Assembly This kit provides a stand top cover with battery for the NCR PX10/PX15 POS (7746). Description 9700-0060-7746 7746 Battery Assembly 9700-0061-7746 7746 Battery Assembly, Orderman Note: The Battery comes attached to the Top Cover.
- Page 4 Battery Driver Windows OS 1. Ensure you have the latest Windows BIOS from NCR.com. You must have version 1.0.9.1 or higher for proper battery operation. For more information, refer to the BIOS Updating Procedure chapter in NCR PX10/PX15 POS (7746) User Guide.
-
Page 5: Installation Procedure
7746 Battery Assembly Installation Procedure 1. Pivot the display toward the back. 2. Remove the screw (1) that secures the Front Neck Cover to the neck. Note: Use only a screwdriver with a #1 Philips bit to avoid stripping the screw head. - Page 6 7746 Battery Assembly 3. Pivot the Front Neck Cover away from the terminal. 4. Slightly push the front side of the Stand Top Cover, and then pivot the Cover open.
- Page 7 7746 Battery Assembly 5. Install the Top Cover with Battery Assembly kit. a. Connect the Battery Cable to the Motherboard. Note: The Battery Cable may have to be peeled off the Battery surface for easy connection. b. Hook the Stand Top Cover into the stand, and then snap into place.
- Page 8 7746 Battery Assembly Note: After the Stand Top Cover is installed, check if the Battery Charge LED is flush with the top surface of the Cover. If the LED Lightpipe is protruding, push it flush with the Cover. 6. Attach the Front Neck Cover to the terminal.
- Page 9 7746 Battery Assembly 7. Secure the Front Neck Cover to the neck with a screw (1).
-
Page 10: System States
7746 Battery Assembly System States When the unit is connected to AC Power • The system runs at maximum performance. However, the performance decreases at high system temperatures. • The Power LED is always ON. For LED indicators, refer to the table below: LED Color... - Page 11 7746 Battery Assembly • The battery is charged if it is not at maximum capacity. • The battery is not charged if its temperature is below 0°C (32°F) or above 45°C (113°F). This is to maximize the battery lifespan. When the unit is running on Battery Power only •...
- Page 12 7746 Battery Assembly When the Customer Display is connected to USB-C port The customer display functions when: • It is connected before the system boots on AC power. • It is connected to a system that is running on AC power.