Specifications - Sony SDM-V72W User Manual

Specifications

LCD panel Panel type: a-Si TFT Active Matrix
Display size: 17.1 inch (diagonally)
Display Resolution Horizontal: Max. 1280 dot
Vertical: Max. 768 lines
Input signal RGB operating frequency*
Horizontal: 28-70 kHz
format
Vertical: 45-85 Hz
Pixel clock: 94.5MHz max.
PC Input signal Analog RGB video signal:
0.7 Vp-p, 75 , positive
levels
SYNC signal:
TTL level, 2.2k , positive or
negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 , negative
(Sync on green)
Component Y: 1 Vp-p, 75 ohms, 0.3 V
negative sync
Video IN 2/RGB IN
Pb: 0.7 Vp-p, 75 ohms
Pr: 0.7 Vp-p, 75 ohms
Video IN S-Video In (4-pin mini DIN):
Y: 1 Vp-p, 75 ohms unbalanced,
sync negative
C: 0.286 Vp-p, 75 ohms
Video (phone jack):
1 Vp-p 75 ohms unbalanced,
sync negative
Audio Output Speaker output: 3W x 2
Headphone jack: Stereo minijack
Impedance 16-48
Audio Inputs
Power Requirements
Power Consumption
Operating
Temperature
Display dimensions
(w x h x d)
Mass
Plug & Play
Accessories
acceptable
*Recommended horizontal and vertical timing condition
500 mVrms (100% modulation)
Impedance 47 kilohms
100 – 240 v, 50/60 Hz,
max. 0.9 - 0.5 A
(including AC adapter)
Max. 49 W
(including AC adapter)
5 –35 C°
Upright with stand:
Approx. 472 x 405 x 184 mm
(18.6 x 15.9 x 7.2 inches)
Upright without stand:
Approx. 472 x 348 x 73 mm
(18.6 x 13.7 x 2.9 inches)
With stand:
Approx. 5.9 kg (13 lbs)
Without stand:
Approx. 5.1 kg (11.2 lbs)
DDC2B
See page 8
- 40 -
Horizontal sync width duty should be more
than 4.8% of total horizontal time or 0.8µs,
whichever is larger.
Horizontal blanking width should be more than
2.5µsec.
Vertical blanking width should be more than
450µsec.
Maximum video pixel clock should be less than
94.5 MHz.
Design and specifications are subject to change
without notice.