Table of Contents
Advertisement
Picture Inversion
Picture Orbit
Control Web Pages,
The Picture Inversion section helps protect against residual
image from still pictures. It allows you to turn the picture from a
positive to a negative. Using the original image source, picture
inversion evens out the residual picture image.
To turn on picture inversion, perform the following steps:
1.
In the Picture Inversion section, press the On button to
immediately activate picture inversion. Alternately, press
the Auto button to activate picture inversion after a
predetermined amount of time. For more information on
the Auto functionality, refer to the user's manual for the
plasma.
To turn off picture inversion, perform the following steps:
1.
Press the Off button.
The Picture Orbit section helps protect against residual image
from still pictures. It allows you to determine how the picture
rotates around the screen incrementally and the amount of time it
takes to complete a full cycle. Since the video moves in small
increments, if there is a lot of motion in a video, this is almost
unnoticeable. You can select any combination of range and time
intervals.
To turn on picture orbit, perform the following steps:
1.
In the Orbit Range field, select Small, Middle or Large
from the drop-down list. This determines how the screen
saver rotates around the screen. For example, if you want
the screen saver to move within a small range, select
Small.
2.
In the Orbit Cycle field, select the amount of time in
which you want the screen saver to complete a full cycle
around the screen.
3.
Press the On button.
To turn off picture orbit, perform the following steps:
1.
Press the Off button.
EBS-N200 Network Display Adapter
continued
50
Advertisement
Table of Contents
