Service - Annually; Engine; Air Filter; Engine Oil - Snapper 13 Series Operator's Manual

Section 3 - MAINTENANCE
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for
all components to cool. Wear heavy leather gloves
when handling or working around cutting blades.
Blades are extremely sharp and can cause severe
injury.

3.3 SERVICE - ANNUALLY

Perform all maintenance as described in the "Service
Schedule" section of this manual.

3.3.1. Engine

Service engine according to engine owner's
manual.

3.3.2. Air Filter

Refer to engine owner's manual for service
instructions.

3.3.3. Engine Oil

Refer to engine owner's manual for service
instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner's Manual for directions
regarding engine storage preparations. Prepare the
mower for "end of season" storage as follows:
1. Drain fuel from fuel tank and let engine run until
all fuel is out of the carburetor.
2. Disconnect and remove the spark plug wire
away from spark
preparations are made!
3. Tape all openings closed to prevent spraying
water into exhaust or air intakes during washing.
4. Tilt mower up on its rear wheels and thoroughly
clean the underside of the deck. Do not tilt mower
with spark plug or carburetor down. Scrape away
any accumulation of grass with a putty knife and or
wire brush.
5. Lubricate all exposed metal with a light coating
of oil to prevent corrosion.
6. Loosen handle knobs. Carefully fold the handles
forward, "flexing" the control cables to prevent cable
damage.
7. Store the mower in a shed or other dry area,
protected from weather.
plug before any other
11