Blomberg LDF63440X User Manual page 35

Function Off/On
Changing Warning Sound Volume
1. After switching on your machine, press
the Menu key for 3 seconds.
In some models pressing the Menu
key only for once will allow you to enter
the Settings menu.
2. Press <- and +> keys to move to the
"S:" position on the display.
3. Each pressing on the Selection key will
change the warning sound volume as
"S:0" off, "S:1" medium and "S:2" high.
4 Switch off the machine with the On/Off
key to save the changes.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine, press
the Settings Menu key for 3 seconds.
In some models pressing the Menu
key only for once will allow you to enter
the Settings menu.
2. Press <- and +> keys to move to the
"L:" position on the display. Select the
position you want with the Selection
key. Interior lighting is off in "L:0"
position and on in "L:1" position.
3. Switch off the machine with the On/Off
key to save the changes.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Doormatic
(Depends on the Model)
Thanks to the "Doormatic" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"Doormatic" settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Doormatic feature opens the door at
the end of the washing cycle thanks
to the "door opening shafts". This
process takes about 2 minutes. Do not
force to close the door if the power is
interrupted while the shafts are moving
out. Operation shall be completed
and shafts shall be retracted when the
power is restored.
Doormatic function may cause
changes to the cycle time.
35/EN