Table of Contents
Advertisement
Recording Frame Rate Settings
1. Click the [Frame Rate Settings] button.
The recording frame rate settings window
appears.
2. Set each options using the mouse.
• Resolution: Select the recording resolution.
(NTSC: 352*240, 704*240 or 704*480
PAL: 352*288, 704*288 or 704*576)
•
Quality: Select the recording picture quality.
(Lowest, Low, Normal, High or Best)
•
Frame Rate: Select the frame rate. The frame
rate is the number of recorded frames in a
second. According to resolution, the frame
rate is set automatically. If you set manually,
refer below.
Resolution
352*240
NTSC
704*240
704*480
352*288
PAL
704*288
704*576
•
Pre-Alarm Time: Specify the pre-event
recording time to records the situation until the
sensor alarm signal has input or motion has
been detected. (Off, 5, 10, 20, 30, 40, 50, 60
Sec)
•
Post-Alarm Time: Specify the post-event
recording time that records the situation after
the sensor alarm signal has input or motion
has been detected. (10, 20, 30, 40, 50 Sec or
1, 2, 3, 5, 10 Min)
3. Click the [Ok] button to confirm the settings.
54
Frame Rate
1, 3, 5, 7.5, 15, 20, 30
1, 3, 5, 7.5, 15
1, 3, 5, 7.5
1, 3, 5, 6, 12.5, 20, 25
1, 3, 5, 6, 12.5
1, 3, 5, 6
Get other manuals https://www.bkmanuals.com
Display Settings
1. Set the OSD options.
2. Set the main monitor option.
3. Set the spot monitor options.
Schedule setup
1. Select a day of the week.
2. Mark up the desired recording option.
• No recording: Do not schedule recording.
• Continuous: Recording starts automatically at
the preset time.
• Sensor: Recording starts automatically when
alarm occurs within a designated time.
• Motion: Recording starts automatically when
motion is detected within a designated time.
• Motion+Sensor: Recording starts automatically
when alarm and motion detection occur within
a designated time.
3. Select the channel to set the schedule.
4. Click the start time cell block and drag & drop to
select a time period cell block.
or
Click the start time cell block of a channel and
drag & drop across the channels to select the
time period block for multi-channel setting at the
same time.
The color of the cell blocks will change.
Advertisement
Table of Contents
