Initial Setup - Yamaha CZD250-A Owner's Manual

Initial setup

This section describes the basic setup
procedures to connect your smart-
phone to the CCU and start using
smart features.
1. Download/install the Yamaha Mo-
torcycle Connect app on your
smartphone via an application
store. Complete the installation
and pair/connect it to the CCU via
Bluetooth.
2. To use the navigation system,
download/install the
StreetCross app. Complete the in-
stallation and pair/connect it to the
CCU via Bluetooth.
EAU99109
3. To use the audio/phone/naviga-
tion system
pair/connect a Bluetooth headset
to your smartphone. (See page
5-6.).
Yamaha Motorcycle Connect pair-
ing
NOTICE
The Bluetooth connection may not
work in the following situations.
In a location exposed to strong
Garmin
radio waves or other electro-
magnetic noise.
5-3
Smartphone Connectivity System
At facilities nearby that are
emitting strong radio waves (TV
or radio towers, power plants,
broadcasting stations, airports,
etc.).
1. Download and install the Yamaha
Motorcycle Connect app on your
smartphone.
2. Short press the " " switch to
open the menu system. Navigate
to: "
route guidance,
"Bluetooth".
ECAN0150
3. Make sure there is a blue check-
mark next to "Bluetooth" and se-
lect "Discovery mode".
Settings" "Connection"
5