Note: The temperature reading is the current temperature at the base unit (for
Indoor) or the current temperature at the remote sensor (for outdoor). It is
not the temperature reading at the current location of the handset.
SETTING AND USING THE HANDSET CLOCK
You can change the following time and date settings for the clock display on your
handset:
• Time – 12- or 24-hour clock display
• Date – DD/MM (Date/Month) or MM/DD (Month/Date) display
• Current date and time
If you have multiple handsets, you only need to set the time and date on one
handset. The alarm can be set for each handset separately.
Selecting 12- or 24-hour display
To change the handset hour display format:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
again to select Clock Setting from the options.
5. Press
to select Hour Format from the options.
6. Press
.
7. Press
to select 12 or 24 hours.
8. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
Changing the date format
To change the handset date display format:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
again to select Clock Setting from the options.
5. Press
to select Date Format from the options.
6. Press
.
7. Press
or
to select DD/MM (Date/Month) or MM/DD (Month/Date).
8. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
button.
23
ENG