Alarm Mode Setting Section; Periodical Sending Mode Setting Section - Sony IPELA SNC-Z20N User Manual

Mode
Select the mode of the SMTP function.
Manual: Sends a still image attached to an E-mail
manually. After selecting Manual, click OK. The
SMTP function mode is set to Manual.
In this mode, when you click the
button on the main viewer page, a still image is
captured and sent via an E-mail. (See "Controlling
the Application Manually" on page 11.)
Alarm: Sends a still image via an E-mail by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 33).
Periodical sending: Sends a still image via an E-mail
periodically. When you select Periodical sending,
the Periodical sending mode setting section appears
(see page 33).
Back/OK
See "Buttons common to every setting page" on page
14.

Alarm mode setting Section

Alarm
Select the alarm to link the SMTP function. If the
selected alarm is detected, a still image is captured and
sent via an E-mail.
Sensor: External sensor connected to sensor input of the
camera I/O port
Activity detection: The activity detection function built
in the camera.
To set the activity detection function, click Activity
detection. The Activity detection setting page appears
(see page 41).
Note
The image that can be attached to an E-mail is the one
captured at the moment when an alarm is input. If the
next alarm occurs while the captured image is being
processed, that alarm is ignored.
Available period
Select the period for which the alarm mode is available.
Always: The alarm mode is available any time.
Use scheduler: The alarm mode is available according
to the schedule selected on the Schedule No. menu
below.
(Trigger)
Schedule No.
When Use scheduler is selected on the Available period
menu, select the schedule you want the alarm mode
being available.
Click to select the check box(es) 1 to 6. You can select
multiple schedules.
To check the contents of schedules, click Schedule
check. (See "Setting the Schedule — Schedule setting
Page" on page 40.)
Periodical sending mode setting
Section
Interval time
Type the interval at which you want to send an E-mail
with a still image periodically. You can set the hour (H)
and minutes (M) between 30 minutes and 24 hours (one
day).
Available period
Select the period for which the periodical sending mode
is available.
Always: The periodical sending mode is available any
time.
Use scheduler: The periodical sending mode is
available according to the schedule selected on the
Schedule No. menu below.
Schedule No.
When Use scheduler is selected on the Available period
menu, select the schedule you want the perdiodical
sending mode being available.
Click to select the check box(es) 1 to 6. You can select
multiple schedules.
To check the contents of schedules, click Schedule
check. (See "Setting the Schedule — Schedule setting
Page" on page 40.)
Sending an Image via E-mail — SMTP setting Page
33