Operating The Camera From The Image Control Section; Zooming; Focusing - Sony IPELA SNC-Z20N User Manual

Operating the Camera
from the Image Control
Section
You can operate the camera from the image control
section on the main viewer page.
For this function, user access right Level 2 to Level 4 is
required (see page 25).
Click Control on the menu section to display the
camera control parts.
Image control section (camera control parts)

Zooming

Click to zoom out.
CIick to zoom in.
Note
You can change the operation mode of the zooming
using the TELE/WIDE buttons from the Camera control
mode setting section on the Camera setting page (see
page 21). When you have changed the operation mode,
click Control on the menu section to update the
operation mode setting on the image control section.
When the Zoom mode menu on the Camera setting page
is set to Optical only, clicking this button operates the
electronic ×2 zoom.
The button name changes to DZOOM x 1.
When the Zoom mode menu on the Camera setting page
is set to Optical only, this button is displayed while the
electronic ×2 zoom is operating. Clicking this button
cancels the electronic ×2 zoom.
The button name changes to DZOOM x 2.
10

Operating the Camera from the Image Control Section

About the zoom range
When the Zoom mode menu on the Camera setting page
is set to Full (see page 19), you can operate high-
magnification zoom, optical zoom of × 18 and electronic
zoom of × 12, giving × 216 in total. The electronic zoom
will operate after the optical zoom.
When the Zoom mode menu is set to Optical only, only
optical zoom of × 18 can operate. In this case, you can
use an electronic zoom of × 2 by clicking the DZOOM
x 2 button. To cancel the electronic zoom, click
DZOOM x 1.
Note
When you have changed the Zoom mode menu on the
Camera setting page, click the Control button on the
menu section to update the zoom mode setting on the
image control section.

Focusing

The focus is automatically adjusted when the Focus
mode menu on the Camera setting page is set to Auto
(see page 19). When you set it to Manual, you can
adjust the focus manually from the image control
section, or adjust it with a push of the button.
Adjust the focus manually by clicking the two buttons
alternately.
Click this button to adjust the focus instantly.
Notes
• When you have changed the Focus mode menu on the
Camera setting page, click the Control button on the
menu section to update the focus mode setting on the
image control section.
• You can change the operation mode of the manual
focusing using the NEAR/FAR buttons from the
Camera control mode setting section on the Camera
setting page (see page 21). When you have changed
the operation mode, click Control on the menu
section to update the operation mode setting on the
image control section.