Table of Contents
Advertisement
3
Press (5) (ENTER) momentarily.
P 1
SUR EQ
PLAY MODE
C D 1
DISC
SUR EQ
3
PLAY MODE
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "*Wait*" appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• "*Mem full*" appears in the display when you try to
enter more than 12 tracks into a program.
Playing the stored program
EN
Changing the disc order in the unit will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired program appears.
Program play starts.
Program 1 Playback
C D 1
SUR EQ
PLAY MODE
Program 2 Playback
C D 1
SUR EQ
PLAY MODE
Programs 1 and 2 Playback
C D 1
SUR EQ
PLAY MODE
Normal Playback
C D 1
SUR EQ
PLAY MODE
14
+Enter+
ENTER
µ
TRACK
2 P1.‚7
PGM 1
PGM 1
µ
PGM
2
PGM 2
µ
+
PGM 1 2
PGM 1+2
µ
PGM off
4
Press (SHIFT).
To go back to the normal playback mode,
select "PGM off" in step 3 above.
Notes
• If you press a number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
• "NO Data" appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the program memory, or when the program
information has not been loaded yet, "Not Ready"
appears.
Erasing the entire program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P1" above.
2
Press (1) (N) repeatedly until "DEL"
appears.
D E L
SUR EQ
--PGM1--
PLAY MODE
ENTER
To erase Program 2, press (4) (n)
repeatedly until "P2" appears.
3
Press (5) (ENTER) for two seconds.
P 1
SUR EQ
NO Data
PLAY MODE
ENTER
The entire program is erased.
4
When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to the program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P1" above.
To select Program 2, press (4) (n)
repeatedly until "P2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
C D 1
DISC
TRACK
SUR EQ
2
4 P1.‚2
PLAY MODE
Track slot number
Advertisement
Table of Contents
