Table of Contents
Advertisement
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Important:
If the oil level in the crankcase is too low or too high and you run the engine, you may
damage the engine.
Adjusting the Handle
Height
You can raise or lower the handle in 1 of 2 positions
that is more comfortable for you
1.
Loosen both handle knobs until you can push
the square edges of the carriage bolts out of the
square holes in the handle brackets.
2.
Push the knobs until they are loose.
(Figure
11).
Figure 11
Figure 10
3.
Move the handle to the upper or lower height
position.
4.
Pull the knobs until the square edges of each
carriage bolt fits into its related square hole.
5.
Tighten the handle knobs as tight as you can.
g193180
10
g235721
Advertisement
Table of Contents
