Samsung ATIV Book 7 NP730U3E User Manual page 76

Using the TPM Security Device
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
• Initializing the TPM chip erases all authentication
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
• To initialize the TPM chip again while the TPM function is
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after re-
initialization.
1
Restart the computer.
When the Samsung logo screen appears, press the F2 key
repeatedly.
(Optional)
2
When the BIOS Setup screen appears, select Security > TPM
Configuration and set the TPM Device item to Enabled.
3
Set TPM Status to Clear.
Using the computer
TPM Device Enabled
Disabled
Enabled
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
TPM Device Enabled
Clear
TPM State
No Change
Security Chip State
Clear
Enabled & Activate
Deactivate & Disable
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Chapter 3.
75