Panasonic KX-TGD810 Operating Instructions Manual page 38

Programming
R The registered handset's name/
number is displayed.
Note:
R When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
n From the phonebook:
1
MMENUN#268
2
MbN: "On" a MSELECTN
3
MbN: Select "Outgoing call" to
monitor from outside. a MADDN
4
MbN: "Phonebook" a MSELECTN
5
MbN: Select the phonebook entry. a
MSAVEN
R "Baby monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
MMENUN#268
2
MbN: "On" a MSELECTN
3
MbN: Select "Outgoing call" to
monitor from outside. a MADDN
4
MbN: "Manual" a MSELECTN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN
a MSELECTN
R "Baby monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
For assistance, please visit https://shop.panasonic.com/support
38
TGD81x_83x(en)_0316_ver222.pdf
1
2
3
Editing an outside monitoring number
1
2
3
4
5
6
7
Erasing an outside monitoring
number
1
2
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
2
3
38
Press MMENUN on the handset being
monitored.
MbN: "On/Off" a MSELECTN
MbN: "Off" a MSELECTN a MOFFN
Press MMENUN on the handset being
monitored.
MbN: "On/Off" a MSELECTN
MbN: "On" a MSELECTN
MbN: Select the outside line. a MMENUN
MbN: "Edit" a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN a MSELECTN
Press MMENUN on the handset being
monitored.
MbN: "On/Off" a MSELECTN
MbN: "On" a MSELECTN
MbN: Select the outside line. a MMENUN
MbN: "Erase" a MSELECTN
MbN: "Yes" a MSELECTN a MOFFN
Press MMENUN on the handset being
monitored.
MbN: "Sensitivity level" a
MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
2023/03/16 9:00:34