Table of Contents
Advertisement
Connections
Connect the antenna.
1
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
Connect the AC power supply cord after all other connections are completed.
This unit consumes a small amount of AC power (l p. 20) even when turned off.
≥ In the interest of energy conservation, if you will not be using this unit for an extended
period of time, unplug it from the AC outlet.
≥ These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic
devices.
≥ Tape the antenna to a wall or column in a position with the least amount of interference.
≥ To improve FM radio reception in low signal areas, an external antenna (not supplied) can be connected using a "right
angle Quick Disconnect "F" type connector" (not supplied).
Connect an external music device
1
Connect an external music device using an
audio cable (not supplied).
≥ Plug type: ‰3.5 mm (
2
Press [RADIO/AUX] to select "AUX" and start
playback on the connected device.
∫ To select the sound input level of the
external device
1
While in AUX mode, press [SOUND] repeatedly
to select "INPUT LEVEL".
2
Press [3, 4] to select "NORMAL" or "HIGH"
and then press [OK].
≥ The factory default is "NORMAL".
≥ To improve sound distortion when "HIGH" is selected, select "NORMAL".
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input
signal will distort the sound.
≥ For details, refer to the owner's manual of the device.
6
RQT9882
To an AC outlet
/
q) stereo
1
8
AC power supply cord (supplied)
Audio cable
(not supplied)
Advertisement
Table of Contents
