Precautions On Installation; G G Related Links; Projector Placement - Epson EH-LS650W User Manual

Projector Placement

If you cannot install the projector squarely facing the screen, correct
any resulting keystone distortion using the
a
remote control. For the best quality images, we recommend adjusting
the installation position of the projector to achieve the correct image
size and shape.
Warning
Do not install the projector in a location subject to high levels of dust or humidity,
or in a location subject to smoke or steam. Otherwise, it could cause a fire or
electric shock to occur.
Warning
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air filter
may become clogged, resulting in a malfunction or fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
• Make sure you do not operate the projector in the following positions.
button on the
• Do not operate the projector on its side.
• Do not project images straight up or straight down.
• Do not tilt the projector right or left.
• If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Settings > High Altitude Mode

g g Related Links

• "Precautions on Installation"

Precautions on Installation

Installation space
Attention
Be sure to leave the following amount of space around the projector so as not to
block the air exhaust and intake vents.
10 cm
30 cm
B
p.17
17